AutoCAD Tutorials, tips and solution

Chamfer and Fillet command of Auto CAD

banner

CHAMFER command can be executed by following ways

Chamfer

Toolbar : From Modify toolbar click chamfer tool

Chamfer from menubar

Menubar : Click Modify (menu) Ø chamfer (option)

chamfer 38

Command line : Type chamfer or cha and press Enter Key

Chamfer:

In chamfer command there are two distance required. These distances should be set first then you can select first line and second line for chamfering. Once you set the distance you can continue just applying chamfer command and clicking first line, second line. Assume you have a drawing like

Chamfer an object

Follow the steps below to make chamfer like above example.

  1. From Modify toolbar click on Chamfer tool (Toolbar used to execute the command)
  2. Type d and press Enter Key (for distance setting)
  3. Type 5 and press enter key (for first line distance)
  4. Press Enter Key again to input same distance for second line
  5. Click on line a then click on line

If you have a rectangle you can chamfer four corners at a time.

Follow the steps below to make chamfer like above example.

chamfer

  1. Type cha and press enter key (Command line used to execute the command)
  2. Type d and press Enter Key (for distance setting)
  3. Type 6 and press Enter Key (for first line distance)
  4. Press Enter Key again to input same distance for second line
  5. Type p and press enter key (for polygon option)
  6. Click on any one line of rectangle

FILLET command can be executed following ways

Icon of fillet

Toolbar : From Modify toolbar click fillet tool

fillet

Menubar : Click Modify (menu) Ø fillet (option)

Fillet from command line

Command line : Type fillet or f and press Enter Key

Fillet:

In fillet command you need to set radius first then you can select first line and second line for filleting. Once you set the radius you can continue just applying fillet command and clicking first line, second line. Assume you have a drawing like

Fillet an object

Follow the steps to make fillet like above example.

  1. Type f and press enter key (Command line used to execute the command)
  2. Type r and press Enter Key (for radius setting)
  3. Type 6 and press enter key (for 6 unit radius)
  4. Click on line  then click on line

fillet

If you have a rectangle you can fillet four corners at a time.

Follow the steps below to make fillet like above example.

  1. From Modify toolbar click on Fillet tool (Toolbar used to execute the command)
  2. Type r and press Enter Key (for radius setting)
  3. Type 7 and press enter key (for 7 unit radius)
  4. Type p and press enter key (for polygon option)
  5. Click on any one line of rectangle

 


Leave a Comment

Your email address will not be published. Required fields are marked *

Loading...